WS2815 Addressable LED Strip Light
Product Parameter:
P/N |
Beam angle |
VCC |
Power/M |
LED Qty |
IC Chip |
Size(mm) |
PCB Color |
Lumen per meter |
IP Rate |
MDR-CLWS2815-30RGB |
120 deg |
DC12V |
7.5W(MAX) |
5050 30leds/m |
WS2815 |
5000*10 |
White/Black |
R:12000 G:21000 B:5700 |
IP20/IP65/IP68 |
MDR-CLWS2815-60RGB |
120 deg |
DC12V |
15W(MAX |
5050 60leds/m |
WS2815 |
5000*10 |
White/Black |
IP20/IP65/IP68 |
IP20/IP65/IP68 |
MDR-CLWS2815-144RGB |
120 deg |
DC12V |
36W Max |
5050 144leds/m |
WS2815 |
1000*12 |
White/Black |
R:57600 G:100800 B:27360 |
IP20/IP65/IP68 |
Description
This is a new chip again from worldsemi family ,based on WS2812B and WS2813.
To solve the chip breakdown and Strip's Voltagedrop ,now we welcome WS2815.
The Flex is 30/60/144 Pixel/ LED per meter ,and 5 m in a roll we provide black and white color board.
same as our other addressable tapes, it's cut-able per unit LED with a large soldering Pad which makes
easy to re-solder again.
the PCB printed +12V DI ,BI, GND , both DI and BI means signal but it's only required to link the DI cable to your controller.
this PCB made by 3Ounce copper for more reliable application.
3 M tape attached on backside of strip.
again we suggested you power it every 5 meters even it's 12V addressable.
Dimension:
Applications:
· City skyline lighting villas advertising wall signs Christmas ( , , decorative landscape)
· Irregular design of body decoration (shopping malls, hotels, nightclubs, polygonal wall KTV
· establishments ceiling cavity design)
· Public lighting lighting (schools, libraries, hospitals, airports, subway stations, railway stations)
· Furniture dark groove trim (door, bar, wine cabinet, wardrobe, TV cabinets, etc.)
· Automotive beauty (body, underbody, wheelbarrow balanced car, etc.)
Notes:
· Please read the specifications and precautions carefully before installation
· Please do not use nails or sharp instruments to intall led strip on the object, use double-sided tape or glue or wall mounted on plywood
· Fixed led strip, you can not use acidic glue, it is recommended to use a neutral glue.
· This product is a constant voltage DC5V, make sure Power is right before installation, after installation, check the wiring is
· Correct or not , so that avoid the product been burned
· This product is recommended use in parallel. when the length is more than five meters, the tail so be power to ensure the brightness is enough or uneven
http://www.midoriledlights.com/